Imagine an analytics engineer on a calm afternoon, proudly pointing at a dashboard where every pipeline shows green and every table is replicated into a second zone. Someone asks what happens if the whole region disappears. The room goes quiet, and the honest answer turns out to be “we would find out.” That moment is where DisasterRecoveryOps starts: treating recovery as something you practise and measure, not something you assume because the architecture diagram has two boxes instead of one.
Data teams are especially prone to comforting stories, because storage is cheap and copies feel like safety. Here are six myths I hear in review meetings, and what the evidence says about each.
Myth 1: “We run across several zones, so we have disaster recovery”
Spreading a warehouse or a streaming cluster over multiple availability zones is a fine way to survive a failed rack or a flooded building. It is high availability, and it is worth having. But the zones share a region, and the region shares a control plane, an identity system and a set of service limits. If the event is regional, all your zones are inside it.
One cloud region incident in 2023 is a useful picture of how this plays out: a water leak and fire took one building of three offline, and an internal database that keeps its replicas across the buildings lost quorum because two of three replicas happened to sit in the affected one. Disks in the region turned read-only and the regional identity service stayed down for around thirteen hours. Zones helped, yet they were not the whole answer. The Atlas draws the same line between surviving a zone loss and surviving a regional event, and notes that for a single data centre loss a backup-and-restore tier may be all a service needs.
Myth 2: “Replication is our backup”
A replica is a mirror. When somebody drops the wrong table, ships a transformation that scrambles a column or lets a pipeline write nulls for an hour, the mirror faithfully reproduces the damage seconds later. Disaster recovery for data needs point-in-time copies that sit behind the live stream, so you can rewind to before the mistake.
The July 2024 endpoint outage, caused by a faulty content update reaching millions of Windows machines in about an hour and eighteen minutes, teaches the same thing from a different direction. A fault that is pushed everywhere at once cannot be solved by switching to another copy of the same thing. Your data estate has its own version: a bad deploy that every environment accepts.
Myth 3: “RTO is just our average repair time”
It is easy to confuse these two, especially when your incident tooling already reports a repair-time average. The recovery time objective is a target you promise for one specific bad scenario. A mean is a statistical summary of many past incidents, mostly small ones. A team can have a lovely average and still miss the target in the single scenario that matters, because the big event is rare and its timing is dominated by things the average never sees.
The second thing that gets overlooked is the front end of the clock. In the worked example in the Ops Atlas, recovery took 33 minutes of systems time, but the people took 31 minutes to detect and decide, so the total was 64 minutes against a 60-minute objective. Nothing was broken in the automation. The target was missed in the conversation. If you own a data platform, write down who is allowed to say “invoke the plan”, and how long they have.
Myth 4: “RPO is the volume of data we can shrug off”
Almost everyone says it that way, and it is slightly off. Under NIST’s wording the objective names an instant on the calendar, the state of the data you must be able to return to before work resumes. How much you lose is simply the gap between that instant and the moment things broke. This distinction matters for data engineers because your pipelines have many stages, each with its own lag.
Think about a service that reads from a transactional store, a stream, a cache and an object bucket. If the stream is behind by two minutes and the bucket by ten, the honest answer to “how current will we be?” is ten, not two. The Atlas calls this the effective RPO: the worst lag across every store the service needs. Measure each one, not just the one you built a dashboard for.
Myth 5: “Our provider handles recovery for us”
Providers run their platforms and they publish impressive durability numbers. What they do not do is decide your priorities, test your failover or rebuild your pipeline definitions. Microsoft’s own documentation says plainly that this protection does not arrive switched on by default, and the shared-responsibility documents of the other large providers say much the same. The infrastructure is theirs; the plan, the drills and the decision to invoke are yours.
A related trap is trusting backups kept next to the thing they protect. When a fire destroyed a data centre building in Strasbourg in 2021, some customers found that their backups had been stored on the same site and were lost along with the servers. A court later awarded damages in a French case, though the provider is appealing, so treat the legal side as unsettled. The engineering lesson needs no verdict: keep recovery copies in a different failure domain.
Myth 6: “The cause is found, so we are done”
Naming the cause feels like closing the case, and it is tempting to stop the stopwatch right there. During the large October 2025 outage in a major US region, the timeline shows the DNS problem identified roughly fifty minutes in and DNS healthy again after roughly two and a half hours, while ordinary virtual machine launches took about fourteen hours to settle. Diagnosis is not restoration. Backlogs, throttled control planes and dependent services all keep recovery going long after someone says “found it.”
For a data team, the equivalent is the replay backlog. Even after the source is healthy, you may have hours of events to reprocess and idempotency rules to respect. Plan the reconciliation as part of recovery, not as clean-up for next week.
What to do instead
You do not need a heroic programme. Start with three moves that fit a data team’s week.
- Sort your datasets and pipelines into three bands by how long the business can wait and how much recent history it can lose. Aim the expensive strategies only at the top band.
- Run one rehearsal against a copy of the environment, with a stopwatch, and record detection time, decision time and technical time as three separate numbers.
- Check the credentials you would need on the bad day. An October 2025 outage also hit token and sign-in services, so park emergency logins in a vault that sits outside the region you are leaving behind.
If your estate already spans more than one cloud, the same ideas apply with extra care about which control plane each step relies on. Our site has a useful discussion of running data operations across several clouds, and it pairs naturally with the questions above. Teams that also care about keeping real-time flows healthy can read a take on preventing pipeline breakages in live analytics before they begin drills.
For the broader reference, the Ops Atlas has a long entry on DisasterRecoveryOps as a continuing practice. It is worth a skim just for the anti-patterns list, which will make you smile and wince in equal measure.